- Product details
- Specifications
- Recommand
- Service & Policy
01 / PRODUCT DETAILS
ABB STROMBERG · LEGACY CONTROL HARDWARE
|
MEMORY AND I/O PROCESSING
IOD86-MEM
ABB Stromberg Memory I/O Processor Board
Revision-specific rack hardware for established ABB Stromberg control systems, retained where the documented installed architecture remains in service.
|
CONTROL CONTEXT
Host-coordinated rack processing
The board supports local memory and I/O handling through the compatible backplane. Slot assignment, system revision and host software should be verified together before commissioning.
|
02 / DIAGNOSTICS, PROTECTION & INSTALLATION
|
Diagnostics & Protection
FAULT ISOLATION
Compare rack diagnostics, controller status, I/O behaviour and alarm history before condemning the board.
MEMORY INTEGRITY
Investigate intermittent resets, corrupted operating data and timing errors against the installed system documentation.
HANDLING PROTECTION
De-energize the rack, use ESD controls and inspect connector pins before removal or insertion.
|
Installation & Upgrades
BASELINE RECORD
Record slot position, reference 57088338, rack revision and host software before replacement.
LIKE-FOR-LIKE FIT
Confirm backplane keying, edge connector, retention hardware and board revision before installation.
MIGRATION REVIEW
Document I/O mapping and memory dependencies before replacing the legacy rack architecture.
|
Specific technical data
|
INTERNAL BUS CLOCK
86MHz
|
AMBIENT RANGE
0–55°C
|
RELATIVE HUMIDITY
Up to 95% RH
Non-condensing
|
|
PROTECTION CLASS
IP20
Open chassis
|
PCB CONSTRUCTION
Multi-layer glass epoxy
|
EDGE CONTACT FINISH
Gold-plated fingers
|
Verify the exact board revision and installed ABB Stromberg documentation before commissioning.
03 / BRAND & APPLICATIONS
Brand characteristics
| Control heritage |
ABB Stromberg hardware supports long-life process and drive-control installations. |
| Modular architecture |
Plug-in boards separate processing, memory, I/O and interface functions. |
| Revision discipline |
Board identity, slot assignment and host software form one installed configuration. |
| Service continuity |
Legacy spare support can extend assets where migration is not yet scheduled. |
| System integration |
Backplane timing and memory behaviour remain coordinated with the host controller. |
|
Application fields
| Paper & pulp |
Continuous-process control using established Stromberg rack systems. |
| Metals processing |
Drive and line-control duties with deterministic rack operation. |
| Marine systems |
Legacy propulsion and auxiliary automation requiring matched spare hardware. |
| Industrial drives |
Local processing within documented drive and control cabinets. |
| Lifecycle service |
Revision-controlled replacement during planned outages and urgent recovery. |
|
Product references
ABB
| PM861AK01 |
PM864AK01 |
CI854A |
CI867 |
| AI810 |
AO810 |
DI810 |
DO810 |
| AI830A |
AO845A |
DO802 |
TU843 |
| SD821 |
PM154 |
PM153 |
TC570 |
| NMTU-21C |
DSQC627 |
AI880A |
DI840 |
|
Bachmann
| MX213 |
MX220 |
MC210 |
MC212 |
| DI232 |
DO232 |
AI204 |
AI208 |
| AO202 |
DIO248 |
NT255 |
FS212 |
| PTAI216 |
AIO288 |
CNT204 |
RS204 |
| EM213 |
MIO106 |
MPC270 |
SCT202 |
|
04 / SERVICE & POLICY
QUOTATION SUPPORT
| Quote |
Disclaimer |
|
IDENTIFY
Provide IOD86-MEM, reference 57088338, rack type, slot position, required quantity and delivery destination.
|
INDEPENDENT SUPPLY
This website is not affiliated with, endorsed by, or authorized by any of the listed manufacturers or trademarks. Ewolomodule is not an authorized distributor, dealer, or representative of the products displayed on this website.
|
|
VERIFY
Confirm backplane, host software, connector condition, installed hardware revision and ESD-controlled service requirements.
|
TRADEMARK OWNERSHIP
All product names, trademarks, brands, and logos used on this website are the property of their respective owners.
|
|
QUOTE & DELIVERY
State the required date, preferred shipping method and antistatic packing needs. Availability, condition, warranty, lead time and shipping details will be checked before quotation.
|
IDENTIFICATION PURPOSE
The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
|
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
English 
فارسی
français
русский
italiano
español
português
Tiếng việt
Indonesia
हिन्दी
network supported
Contact us
Whatsapp: +86 17359287459
