The 3300 XL 8 mm Proximity Transducer System consists of:

1. One 3300 XL 8 mm probe,
2. One 3300 XL extension cable¹, and
3. One 3300 XL Proximitor Sensor².

The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements³.

Description Notes: 1. One-meter systems do not use an extension cable. 2. Proximitor sensors are supplied by default from the factory calibrated to AISI 4140 steel. Calibration to other target materials is available upon request. 3. Consult Bently Nevada Applications Note, Considerations when using Eddy Current Proximity Probes for Overspeed Protection Applications, when considering this transducer system for tachometer or overspeed measurements.

Q: What are the payment terms?
A: Usually through wire transfer, PayPal and Western Union transfers are also accepted