Tel : +86 17359287459
Email : sales9@apterpower.com
|
OFFICIAL DATA SNAPSHOT
330400-01-00 technical profile |
20 verified fields |
|
Sensitivity
100 mV/g (10.2 mV/m/s2) +/-5%
|
Acceleration range
50 g peak, 10 Hz to 15 kHz
|
|
Amplitude linearity
+/-1% to 50 g peak
|
Broadband noise floor
0.004 g rms, 10 Hz to 15 kHz
|
|
Frequency response
10 Hz to 15 kHz +/-3 dB
|
Precision response
30 Hz to 10 kHz +/-10%
|
|
Mounted resonance
Greater than 30 kHz
|
Transverse sensitivity
Less than 5% of axial
|
|
Mounting stud
1/4-28 UNF integral stud
|
Agency approval
None (00)
|
|
Input voltage
-24 +/-0.5 Vdc
|
Bias current
2 mA nominal
|
|
Operating / storage temperature
-55 to +121 degrees C
|
Shock survivability
5,000 g peak maximum
|
|
Ingress rating
Equivalent to IP68, sensor only
|
Typical weight
99 g without cable
|
|
Dimensions
2.3 cm diameter x 5.9 cm high
|
Connector
3-pin MIL-C-5015
|
|
Case material
316L stainless steel
|
Maximum cable length
30,500 cm
|
Source: Bently Nevada / Baker Hughes official datasheet. Values shown are tied to the complete part number above.
Disclaimer: Ewolomodule sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Ewolomodule is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.